The MB Tension Sensor was designed to be used with a tension controller or tension meter.
It supports a wide range of products, with any tension range. The MB Tension Sensor has long been a strong seller, since sales were launched 20 years ago.
Specifications ModelMB05BMB05AMB11BMB11AMB25BMB25AMB33BMB33AMB41Rated tension (N)Roll displacement (μm/N)Allowable roll weight (kg)Allowable overload (N)Unit weight (kg)Tension resultant directionMounting angleSupply voltageAmbient temperatureApplicable bearings
|Ten times rated load|
|Forward or reverse possible||Forward only (reverse impossible)|
|Any desired angle|
|-10 to +60℃|
1. Figures for rated tension and allowable roll weight are for double-sided detection. For single detection the above figures should be halved.
2. A 5m cable with connectors for connection to an amplifier is supplied.
3. MB05, MB11 and MB25 can be wall mounted with a bracket. If the unit is equipped with a bracket, "-W" is added to the end of its model name. e.g.
4. Sensors with inherently intrinsic safety construction are also available. "S" is added to the end of the corresponding model name. e.g. MB11BS.