Introducing a bearing-type tension sensor that can be cleaned with water.
The CJ sensor is essential for tension control of sophisticated plastic films used in leading-edge industries, including flat-screen TVs, rechargeable batteries, thin and light solar cells, and organic EL lighting which is expected to become the next generation of lighting.
The CJ series of tension sensors are bearing-type sensors, so they can easily be installed on existing lines.
Specifications ModelCJ200CJ500CJ1000 Diagram number Diagram number with adapter unit*1Rated tension (N)*1Maximum roll load (N)*1,5Maximum overload Roll displacement (μm·N)*2Resonance frequency (Hz)*3Frequency response (Hz) Main unit mass (kg) Direction of resultant tension force Mounting angle Supply voltage Ambient temperature/humidity IP Protection Rating
|Forward or reverse|
|Any desired angle|
|±15VDC ±1V （+15V/50mA，-15V/10mA）|
|0 to +50°C, 35 to 85%RH (No condensation permitted)|
|*1. The figures for rated tension, maximum roll load, and maximum overload are for double-sided detection.
*2. The resonance frequency figures are for the tension load during double-sided detection and at maximum roll load.
*3. The frequency response figure is with respect to a change of 1/10 in the rated tension.
*4. The figure in parenthesis is the mass including the adapter unit.
*5. The maximum overload represents the maximum value of the force exerted in the direction of the resultant force.