MENU SẢN PHẨM
ĐỐI TÁC
TỶ GIÁ

Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco Vietnam

22/08/2016 10:48

Web Control Systems
Tension Control Systems TSA Tension Sensor Overview |  Feature |  Specifications | web_tsa_main Overview

web_tsa_2nd.jpg

Applicable to a wide range of materials, and in tension control in industry sectors that will support the next generation!

The TSA tension sensor is a high-performance unit that uses a strain gauge system. The sensor has a high spring rigidity, high resonant frequency, and very little displacement even at high tension levels. This means that the TSA tension sensor is ideal not only in the tension control of paper and PET film, but also for applications in industries that manufacture highly functional films, low-stretch webs and high-value-added products. Nireco also offers an intrinsically safe explosion-proof TSA tension sensor that can be installed in hazardous locations where the atmosphere is explosive.

Intrinsically safe explosion-proof model

Information about "intrinsically safe explosion-proof"

The intrinsically safe TSA tension sensor is installed in hazardous locations where there is the risk of flammable or explosive gas or steam. The tension controller, tension display and power supply are located in a non-hazardous location where there is no hazardous gas or steam. A safety barrier is installed between the tension sensor and these other devices, to maintain a state of safety.

Feature

web_tsa_3rd.jpg

  • High spring rigidity
    The sensor's high spring rigidity means that its resonance is high, which makes it ideal for high-speed lines.
  • Little displacement under loads
    As there is very little displacement under load, the TSA sensor is well suited to thin web lines, such as film and foil.
  • Excellent performance
    The sensor's strain gauge system yields superior linearity and hysteresis.
  • Mounting compatibility
    The TSA has the same external dimensions as the earlier MB tension sensor, making retrofitting simple.
    * Cabling will need to be converted or replaced.
    * May not be possible for all models.

Specifications Standard Model ModelTSA200
(MB11)TSA1000
(MB25)TSA010K
(MB33, MB41)*1Rated tension (N)*1Permissible roller load (N)*1
*2Permissible overload
(10-times rated load) (N) Roller displacement (μm/N) Spring constant (N/mm)*3Resonant frequency (Hz) Output voltage under a single load-rated loading (mV)*4Response time (msec) Mass (kg) Tension direction Mounting angle Power supply voltage Operating temperature and humidity Operating principle IP protection rating

200 1000 10000
200 1000 7000
2000 10000 100000
0.3 0.05 0.005
3333 20000 200000
91.0 99.6 108.1
±420±63mV/100N ±370±55mV/500N ±535±80mV/5000N
0.5 or less
1.4 3.6 16
Forward and reverse direction Forward only (reverse impossible)
Full 360°
±15VDC (+15V/50mA,-15V/10mA)
0 to 50°C, 35 to 85% R.H., no condensation
Strain gauge detection
IP30
Note
*1. Values for rated tension, permissible roll weight and allowable overload are those applicable in double-sided detection. The figures for single-sided detection are 1/2 of these values.
*2. The allowable overload indicates the permitted force applied in the direction of the resultant tension.
*3. The resonant frequency listed is that during double-sided detection when tension is at its maximum and when the roll weight is at its maximum.
*4. The response time is that value measured when the tension change is 1/10th of the rated tension.

Intrinsically Safe Construction Model ModelTSA200S
(MB11S)TSA1000S
(MB25S)TSA010KS
(MB33S, MB41S)*1Rated tension (N)*1Permissible roller load (N)*1
*2Permissible overload
(10-times rated load) (N) Roller displacement (μm/N) Spring constant (N/mm)*3Resonant frequency (Hz) Output voltage under a single load-rated loading (mV)*4Response time (msec) Mass (kg) Tension direction Mounting angle*5Power supply voltage Operating temperature and humidity Operating principle*6IP protection rating

200 1000 10000
200 1000 7000
2000 10000 100000
0.3 0.05 0.005
3333 20000 200000
91.0 99.6 108.1
±350±52.5mV/100N ±315±47mV/500N ±460±68mV/5000N
0.5 or less
1.4 3.6 16
Forward and reverse direction Forward only (reverse impossible)
Full 360°
±6VDC/20mA
0 to 50°C, 35 to 85% R.H., no condensation
Strain gauge detection
IP30
Note
* 1. Values for rated tension, permissible roll weight and allowable overload are those applicable in double-sided detection. The figures for single-sided detection are 1/2 of these values.
* 2. The allowable overload indicates the permitted force applied in the direction of the resultant tension.
* 3. The resonant frequency listed is that during double-sided detection when tension is at its maximum and when the roll weight is at its maximum.
* 4. The response time is that value measured when the tension change is 1/10th of the rated tension.
* 5. The power supply voltage indicates the voltage input to the safety barrier.
* 6. Caution indicated by an "X" mark: Do not allow the tension sensor to be subjected to impacts or friction as there is the risk that it may ignite.
Chia sẽ qua twitter bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua MySpace bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua google bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua LinkedIn bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua facebook bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua stumbleupon bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua icio bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua digg bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua yahoo bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua yahoo bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua yahoo bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco VietnamChia sẽ qua yahoo bài: Cảm biến lực căng TSA200 (MB11) / TSA1000 (MB25) / TSA010K (MB33, MB41) Nireco - Nireco Vietnam
Bản quyền © 2012-2018 thuộc TheGioiCongNghiep.org. Giữ toàn quyền.